TERMINAL BLOCKS FOR ELECTRIC MOTORS IN BMC
Terminal blocks for electric motors in BMC

TECHNICAL CHARACTERISTICS
All terminal blocks are manufactured in compliance with specific functional and safety requirements:
The pins, obtained by stamping or turning, have a truncated cone base with a cross-shaped notch to prevent rotation or axial movement, and consequent extraction from their seat in the terminal block.
The shape of the pin seat is designed to allow the use of automatic screwdrivers for tightening the nuts.
All terminal blocks are perfectly interchangeable with existing ones on the market, but thanks to the 15 mm high pin option, they also allow the use of the fast and functional "pad" testing system. Terminal blocks can be supplied, depending on requests and needs, with 12 mm and 15 mm high pins.
The terminal blocks, as required by the UL1004 "Electric Motors" standard for 600V voltages, are designed to prevent the cable lugs from rotating in their seats (a consequence of the loosening of the tightening nuts caused by motor vibrations), which, if they come into contact with each other or with the walls of the terminal box, can cause a short circuit in the electrical circuit; the terminal blocks allow the use of normal or pre-insulated cable lugs.
MATERIAL CHARACTERISTICS
BMC-RF Thermosetting Polyester Resin
(UL File No. E111031 approval)
Mechanical properties:
>flexural strength 90MPa
>impact resistance 35 KJ/m²
Thermal properties
>flame resistance (UL94) 94V0 (1.7mm)
Electrical properties
>Volume resistivity 101_4 (Ohm m)
>Dielectric strength 30 (kV/mm)
>High-current Arc resistance to ignition (UL746C) HAI = 0
>Hot-Wire resistance to ignition (UL746C) >120 sec. - HWI = 0
>Comparative Tracking Index (UL746C) > 600 V - CTI = 0
MATERIALS USED
The terminal blocks are made of self-extinguishing insulating material with excellent mechanical, thermal, and dielectric properties.
The terminal block pins and related accessories are made of brass, chosen for its excellent conductivity and corrosion resistance, making them suitable for use even in aggressive environments, such as saltwater environments.
Terminal blocks with galvanized iron pins and hardware can be supplied upon request.
| MODEL | PIN | NOTE |
| 50 X 43 | 8 M4 pins |
Round base pin in brass or galvanized iron |
| 50 X 40 | 8/9 M4 |
Round base pin in brass or galvanized iron |
| 50 X 50 | 8/9 M4 |
Round base pin in brass or galvanized iron |
| 65 X 65 | 8/9 M4 |
Round base pin in brass or galvanized iron |




